Blog - Core Diagnostics

Mk1 Interface Setup

Mk1 Interface Setup Step 1. Do you have a Google account? If the answer is yes, please proceed to step 2. If not, please follow the instructions: After you’ve started up the tablet for the first time, you have to make a few choices such as language etc. Then you will...

Core Pro Setup

Core Pro Setup Step 1. Attach OBD Cable Attach the supplied OBD cable to the Core Pro using a Torx 10 tool. Step 2. Connect the Core Pro to your WiFi network Connect the 16-pole OBD connector of the Core Pro to the OBD port of a vehicle and follow the next steps:...

WiFi Router Port Settings

WiFi Router Port Settings Step 1. Core Diagnostics app port scan You can easily check your TCP/UDP port settings. Connect the Core Diagnostics to your Android device and start the app. When any port issues occur, the app will inform you immediately during startup....

Android App Error Codes

Android App Error Codes If you are seeing error code 4, 5 or 9, please contact us here. Otherwise follow the steps below to solve most error codes. Possible Error Codes Code 1 – USB disconnect exception Code 2 – USB driver not found exception Code 3...

App Default Settings

App Default Settings If you would like to run multiple versions of the Android app on your device, do not select a Core Diagnostics app to be the default app to run when Core Remote Interface is connected to a vehicle. When you do so, everytime you connect the Core...